Oil / Air Coolers | Wire Wound Fin Tubes | Fin Tubes | Turbulators | Dishends | Bellows | Pressed & Punched Parts | Brass Naval & Brass Plates
HOME | ABOUT US | PRODUCTS | CONTACT US | E-MAIL | QUERY | SITEMAP                     Search  

Oil / Air Coolers

Application | Wire Wound Fin Tubes | Rigid Turbulators

We have been an OEM supplier of Fin Tubes and Turbulators to the Industry for the last seven years. Given that Wire Wound
Fin Tubes are the most efficient for Oil Cooler applications,We have started manufacturing three years ago,complete Coolers from the same Fin Tubes. These coolers are manufactured as per our customer requirements / drawings. Depending on the application, turbulators are also used in these coolers. The variation in loop density of the turbulator facilitates oils of high viscosities to be cooled within allowable pressure drop limits.

To design a cooler for you, all we need is the design data given below:


a) Heat Rejection
b) Flow rate
c) Process fluid Inlet / Outlet Temperature
d) Air Temperature
e) Air Velocity
f)  Allowable Pressure Drop for Process fluid.
g) Allowable Pressure Drop for Air
h) Size limitations—If any.

Cooler Copper Fin on MS Tubes Cooler
  Cooler
Copper Fin on MS Tubes
Cooler
MANUFACTURER OF
Oil / Air Coolers Dishends
Wire Wound Fin Tubes Bellows
Fin Tubes Pressed Parts
Turbulators Brass / Naval Brass Plates
HOME | ABOUT US | PRODUCTS |CONTACT US | E-MAIL | QUERY | SITE MAP